Hager VA2T2SPD Type 2 SPD Enclosure + L&N Cable

Hager VA2T2SPD Type 2 SPD Enclosure + L&N Cable

• Protects the installation against transient overvoltages
• End of life indicator on Line cartridge gives indication when replacement is required.
• Ideal when retrofitting surge protection to an installation
• No space required inside existing consumer unit or distribution board.

Specification

• Standard: BS EN 61439-3
• Rated Operational Voltage: 230V
• Rated Frequency: 50/60 Hz
• Max discharge (lmax) or impulse (limp): 15kA
• Nominal discharge current (lm): 5 kA
• Voltage protection level up according to IEC 61643-1: 1kV
• Voltage continuous operating voltage Uc: 275V
• Nominal Tightening Torque: 3.6 Nm
• Pollution Degree to IEC 60664 / IEC 60947-2: 2
• Protection index IP: IP2X
• Working Temperature: -40°C up to 60°C
• Storage Temperature: -40°C up to 80°C
• Altitude: 2000m
• Remote Contact: No
• Connection Capacity: 35mm²
• Size H x W x D: 80mm x 152mm x 68mm
• RoHs: Voluntary Conformity
• Warranty: 2 Years

Data Sheet: