Hager VMEF119SPD Design Evo Flush 19 Way 100A Main Switch Consumer Unit with Type 2 SPD

The Hager VMEF119SPD Design Evo Flush Consumer Unit is a high-quality 19 way distribution board designed for modern residential electrical installations. Featuring a 100A main switch and factory-fitted Type 2 Surge Protection Device (SPD), this consumer unit provides dependable circuit protection while helping to safeguard sensitive electronic equipment from transient overvoltages.

Part of Hager's Design Evo range, the VMEF119SPD has been developed for installations where the consumer unit is located within a living area. Its flush-mounted design offers a discreet appearance, whilst installer-friendly features ensure efficient installation and maintenance.

Key Features & Benefits

• 19 way flush-mounted consumer unit with 100A main switch
• Factory-fitted Type 2 Surge Protection Device (SPD)
• 116A rated assembly suitable for modern domestic installations
• Designed for installations within residential living areas
• Cable clamp secures incoming supply cables and meter tails
• Round cable entry points on the top, bottom and sides
• Rear knockouts for flexible cable routing
• Cable protector plate included for rear cable entries
• Rigid top wall construction minimises distortion when removing knockouts
• Full metal DIN rail for secure mounting of protective devices
• Quick-release RCBO clips allow easy device removal with the busbar in place
• Optimised internal cabling space for efficient wiring
• Top-mounted neutral and earth terminal rails for tidy cable management
• Locate-and-hold cover design assists installation
• Retained cover screws prevent accidental loss
• Torque settings displayed inside the front cover for convenience
• Compatible with bidirectional RCBOs for generation installations

Technical Specifications

• Product Code: VMEF119SPD
• Range: Hager Design Evo Flush
• Ways: 19 Way
• Main Switch Rating: 100A
• Rated Assembly Current (InA): 116A
• Integrated Surge Protection: Type 2 SPD
• Rated Operational Voltage (Un/Ue): 230V AC, 50Hz
• Rated Insulation Voltage (Ui): 320V AC
• Rated Impulse Withstand Voltage (Uimp): 4kV
• Rated Frequency: 50Hz
• Conditional Short Circuit Rating (Icc): 16kA RMS at 250V
• Ingress Protection: IP2XC
• Impact Resistance: IK05
• Pollution Degree: 2
• Earthing Systems: TN-C-S, TT and TN-S
• Installation Type: Flush Mounted
• Standards: BS EN 61439-3
• EMC Classification: Environment B
• Incoming Line/Neutral Terminal Capacity: 50mm² (80A–100A boards)
• Incoming Earth Terminal Capacity: 16mm²
• Mechanical Impact Protection: IK05
• Warranty: 2 Years

Factory-Fitted Type 2 Surge Protection

The integrated Type 2 SPD protects electrical installations against transient overvoltages caused by lightning strikes and switching events on the electrical network. This helps safeguard valuable electronic devices, appliances, networking equipment and smart home systems from potential damage.

Designed for Modern Homes

The Design Evo Flush range combines modern aesthetics with practical functionality. The flush-mounted design creates a clean and unobtrusive finish, making it particularly suitable for installations within visible living spaces while maintaining compliance with current wiring regulations.

Compliance and Safety

Manufactured to BS EN 61439-3 standards, the VMEF119SPD supports compliance with BS 7671 requirements. Its robust metal enclosure and integrated surge protection provide enhanced safety and protection for residential electrical systems.

Compatible Accessories

• VM02CE Cable Protector Plate – Protects cables entering through the rear of the enclosure
• VM01SP Rear Stand-Off Plates – Allow surface-mounted cables to enter through the rear of the unit

Ideal Applications

• New-build residential properties
• Domestic rewiring projects
• Property renovations and extensions
• Smart home electrical installations
• Homes requiring integrated surge protection
• Flush-mounted consumer unit installations
• Modern residential electrical distribution systems

Professional Electrical Protection

The Hager VMEF119SPD Design Evo Flush Consumer Unit offers a combination of advanced surge protection, practical installation features and a discreet flush-mounted finish. Designed for modern residential environments, it provides reliable electrical protection and long-term performance.

Instruction Manual:
Download the Hager Design Evo Installation Instructions