Hager VME915CUSPD Design Evo 15 Way High Integrity Consumer Unit with 100A Switch, Dual Type A RCCBs & Type 2 SPD

The Hager VME915CUSPD Design Evo Consumer Unit is a high-performance 15 way distribution board designed for modern residential electrical installations. Featuring a 100A main switch, dual 100A 30mA Type A RCCBs and a factory-fitted Type 2 Surge Protection Device (SPD), this consumer unit delivers comprehensive circuit protection, enhanced fault management and protection against transient overvoltages.

Part of Hager’s Design Evo range, the VME915CUSPD has been developed specifically for domestic applications where the consumer unit is installed within a living area. The high integrity configuration allows selected circuits to be individually protected by RCBOs while remaining circuits are divided across two RCCBs, helping to minimise disruption and reduce nuisance tripping. :contentReference[oaicite:1]{index=1}

Key Features

• 15 way high integrity consumer unit with 100A main switch
• Dual 100A 30mA Type A RCCBs included
• Factory-fitted Type 2 Surge Protection Device (SPD)
• High integrity layout with dedicated RCBO positions
• Reduces nuisance tripping on essential circuits
• Allows effective distribution of earth leakage currents across multiple RCCBs
• Suitable for installations with 60A, 80A or 100A cut-out fuses
• Type A RCCBs suitable for modern electronic loads
• Cable clamp secures incoming supply cables and meter tails
• Round cable entry points on the top, bottom and sides
• Rear knockouts with supplied cable protector plate
• Rigid top wall construction improves enclosure strength
• Full metal DIN rail for secure device mounting
• Quick-release RCBO clips allow removal without disturbing the busbar
• Optimised wiring space for faster installation
• Top-mounted neutral and earth terminal rails for organised cable management
• Locate-and-hold cover simplifies fitting
• Retained cover screws prevent accidental loss
• Torque settings displayed inside the cover for installer reference

Technical Specifications

• Product Code: VME915CUSPD
• Range: Hager Design Evo
• Configuration: 15 Way High Integrity Consumer Unit
• Main Switch Rating: 100A
• RCCB Configuration: 2 x 100A 30mA Type A RCCBs
• Integrated Surge Protection: Type 2 SPD
• Rated Assembly Current (InA): 100A
• Rated Operational Voltage (Un/Ue): 230V AC, 50Hz
• Rated Insulation Voltage (Ui): 320V AC
• Rated Impulse Withstand Voltage (Uimp): 4kV
• Rated Frequency: 50Hz
• Outgoing Device Ratings: RCBOs 6A–50A
• Conditional Short Circuit Rating (Icc): 16kA RMS at 250V
• Ingress Protection: IP2XC
• Impact Resistance: IK05
• Pollution Degree: 2
• Earthing Systems: TN-C-S and TN-S
• Installation Type: Surface Mounted
• Standards: BS EN 61439-3
• EMC Classification: Environment B
• Incoming Line/Neutral Terminal Capacity: 50mm²
• Mechanical Impact Protection: IK05

High Integrity Circuit Protection

The high integrity arrangement allows circuits with higher earth leakage currents to be protected individually using RCBOs, while other circuits remain distributed across two RCCBs. This helps improve fault discrimination and reduces the likelihood of unnecessary power loss throughout the installation.

Integrated Type 2 Surge Protection

The factory-fitted Type 2 SPD provides protection against transient overvoltages caused by lightning activity and electrical switching events. This helps protect modern household electronics, smart home systems, appliances and communication equipment from damage.

Designed for Compliance with BS 7671

The Design Evo range supports compliance with the latest BS 7671 Wiring Regulations, including requirements for additional RCD protection, circuit segregation, concealed cable protection and surge protection. The non-combustible metal enclosure complies with BS EN 61439-3 for domestic consumer units.

Available Accessories

• VM02CE Cable Protector Plate – Protects cables entering through the rear of the enclosure
• VM01SP Rear Stand-Off Plates – Allow rear cable entry for surface-mounted cable installations

Ideal Applications

• Large domestic electrical installations
• Property renovations and rewires
• New-build housing developments
• Smart homes and connected properties
• Installations requiring enhanced circuit segregation
• Homes requiring integrated surge protection
• Residential properties with multiple final circuits

Advanced Protection for Modern Homes

The Hager VME915CUSPD Design Evo Consumer Unit combines a high integrity configuration, dual Type A RCCBs and integrated surge protection within a durable metal enclosure. It provides a reliable, regulation-compliant solution for modern domestic electrical installations where safety, performance and convenience are essential.

Data Sheet:
Download the Hager VME915CUSPD Data Sheet

Instruction Manual:
Download the Hager Design Evo Installation Instructions