Hager VME909CUSPD Design Evo 9 Way High Integrity Consumer Unit with 100A Switch, Dual Type A RCCBs & Type 2 SPD

The Hager VME909CUSPD Design Evo Consumer Unit is a premium 9 way high integrity distribution board designed for modern residential electrical installations. Featuring a 100A main switch, two 100A 30mA Type A RCCBs and a factory-fitted Type 2 Surge Protection Device (SPD), this consumer unit provides enhanced protection, improved circuit segregation and greater reliability for domestic electrical systems.

Part of Hager's Design Evo range, the VME909CUSPD is specifically designed for installations located within living areas. Its high integrity layout allows essential circuits to be individually protected by RCBOs whilst distributing remaining circuits across two RCCBs, helping to reduce nuisance tripping and minimise disruption in the event of a fault. :contentReference[oaicite:1]{index=1}

Key Features

• 9 way high integrity consumer unit with 100A main switch
• Dual 100A 30mA Type A RCCBs included
• Factory-fitted Type 2 Surge Protection Device (SPD)
• High integrity layout with 7 dedicated RCBO ways
• Designed to reduce nuisance tripping on essential circuits
• Allows effective distribution of earth leakage currents across multiple RCCBs
• Suitable for upstream cut-out fuses rated at 60A, 80A or 100A
• Type A RCCBs detect both AC and pulsating DC residual currents
• Cable clamp secures incoming supply cables and meter tails
• Round cable entry points located on the top, bottom and sides
• Rear knockouts supplied with cable protector plate
• Rigid top wall construction improves enclosure strength
• Full metal DIN rail for secure mounting of devices
• Quick-release RCBO clips allow removal without disturbing the busbar
• Optimised wiring space for easier installation
• Top-mounted neutral and earth terminal rails for neat cable management
• Locate-and-hold cover simplifies installation
• Retained cover screws prevent accidental loss
• Torque settings displayed inside the cover for installer convenience

Technical Specifications

• Product Code: VME909CUSPD
• Range: Hager Design Evo
• Configuration: 9 Way High Integrity Consumer Unit
• Main Switch Rating: 100A
• RCCB Configuration: 2 x 100A 30mA Type A RCCBs
• Integrated Surge Protection: Type 2 SPD
• Dedicated RCBO Capacity: 7 Ways
• Rated Assembly Current (InA): 100A
• Rated Operational Voltage (Un/Ue): 230V AC, 50Hz
• Rated Insulation Voltage (Ui): 320V AC
• Rated Impulse Withstand Voltage (Uimp): 4kV
• Rated Frequency: 50Hz
• Conditional Short Circuit Rating (Icc): 16kA RMS at 250V
• Outgoing Device Ratings: RCBOs 6A–50A
• Ingress Protection: IP2XC
• Impact Resistance: IK05
• Pollution Degree: 2
• Earthing Systems: TN-C-S and TN-S
• Installation Type: Surface Mounted
• Standards: BS EN 61439-3
• EMC Classification: Environment B
• Incoming Line/Neutral Terminal Capacity: 50mm²
• Mechanical Impact Protection: IK05

High Integrity Circuit Protection

The high integrity design allows critical circuits to be protected individually using RCBOs, while remaining circuits are distributed across two RCCBs. This arrangement helps reduce unwanted tripping, improves fault discrimination and minimises inconvenience during electrical faults.

Integrated Type 2 Surge Protection

The factory-fitted Type 2 SPD provides protection against transient overvoltages caused by lightning strikes and electrical switching events. This helps safeguard valuable household electronics, smart home systems, communication equipment and other sensitive electrical devices.

Designed for Modern Wiring Regulations

The VME909CUSPD is designed to support compliance with BS 7671:2022 requirements covering circuit segregation, additional RCD protection, concealed cable protection and surge protection. Its metal enclosure also complies with BS EN 61439-3 requirements for domestic consumer units.

Available Accessories

• VM02CE Cable Protector Plate – Protects cables entering through the rear of the enclosure
• VM01SP Rear Stand-Off Plates – Allow rear cable entry for surface-mounted cable installations

Ideal Applications

• Modern domestic electrical installations
• Residential rewiring projects
• Smart homes and connected properties
• Installations requiring circuit segregation
• Properties requiring integrated surge protection
• Homes with essential circuits requiring dedicated RCBO protection

Enhanced Residential Protection and Reliability

The Hager VME909CUSPD Design Evo Consumer Unit combines high integrity circuit configuration, dual Type A RCCBs and factory-fitted surge protection in a robust metal enclosure. Designed for modern domestic installations, it delivers reliable protection, improved circuit management and compliance with current wiring regulations.

Data Sheet:
Download the Hager VME909CUSPD Data Sheet

Instruction Manual:
Download the Hager Design Evo Installation Instructions