Hager VME11314SPD Design Evo 13+14 Way Dual Row 100A Main Switch Consumer Unit with Type 2 SPD
The Hager VME11314SPD Design Evo Consumer Unit is a premium dual-row distribution board designed for larger domestic electrical installations requiring increased circuit capacity and enhanced protection. Featuring a 13+14 way configuration, integrated 100A main switch and factory-fitted Type 2 Surge Protection Device (SPD), this consumer unit delivers outstanding performance, safety and installation flexibility.
Part of Hager's advanced Design Evo range, the VME11314SPD has been specifically developed for installations where the consumer unit is located within living areas. Its robust metal enclosure, spacious wiring layout and installer-friendly features help ensure compliance with current wiring regulations while delivering a neat and professional finish. :contentReference[oaicite:1]{index=1}
Key Features
- 13+14 way dual-row consumer unit with integrated 100A main switch
- Factory-fitted Type 2 Surge Protection Device (SPD)
- Dual-row configuration providing 27 usable outgoing ways
- Designed for modern residential electrical installations
- Supports compliance with BS 7671:2022 requirements for circuit segregation
- Robust steel enclosure designed to meet current fire safety standards
- Integrated cable clamp secures incoming meter tails and supply cables
- Round cable entry points on the top, bottom and sides
- Rear knockouts supplied for flexible cable routing
- Rigid top wall construction reduces enclosure distortion during installation
- Full metal DIN rails provide secure mounting of protective devices
- Quick-release RCBO clips allow device removal without disturbing the busbar
- Optimised wiring space for easier cable management and installation
- Top-mounted neutral and earth terminal rails simplify connections
- Locate-and-hold cover feature allows easier fitting during installation
- Retained cover screws prevent accidental loss
- Optional locking arrangements available for additional security
- Torque settings displayed inside the cover for installer convenience
Technical Specifications
-
Product Code: VME11314SPD
-
Range: Hager Design Evo
-
Configuration: 13+14 Way Dual Row
-
Main Switch Rating: 100A
-
Rated Assembly Current (InA): 100A
-
Integrated Surge Protection: Type 2 SPD
-
Rated Operational Voltage (Un/Ue): 230V AC, 50Hz
-
Rated Insulation Voltage (Ui): 320V AC
-
Rated Impulse Withstand Voltage (Uimp): 4kV
-
Rated Frequency: 50Hz
-
Outgoing Circuit Ratings: RCBOs 6A–50A
-
Conditional Short Circuit Rating (Icc): 16kA RMS at 250V
-
Ingress Protection: IP2XC
-
Impact Resistance: IK05
-
Pollution Degree: 2
-
Earthing Systems: TN-C-S and TN-S
-
Installation Type: Surface Mounted
-
Standards: BS EN 61439-3
-
EMC Classification: Environment B
-
Incoming Line/Neutral Terminal Capacity: 50mm²
-
Incoming Earth Terminal Capacity: 16mm²
-
Mechanical Impact Protection: IK05
-
Warranty: 2 Years
Integrated Type 2 Surge Protection
The factory-fitted Type 2 SPD provides effective protection against transient overvoltages caused by lightning activity and electrical switching events. This helps protect sensitive household electronics, smart home systems, communication equipment and renewable energy technologies from damage.
Designed for BS 7671 Compliance
When fitted with RCBO protection on outgoing circuits, the VME11314SPD is designed to support compliance with BS 7671:2022 regulations relating to circuit segregation, fault minimisation and concealed cable protection. The metal enclosure also assists compliance with current fire safety requirements for consumer units installed in domestic properties.
Available Accessories
-
VMHBL / JK25A Lock & Padlock Kit – Provides temporary locking during installation work
-
VMLOCK Door Locking Kit – Converts the consumer unit into a lockable enclosure
-
VM05GS Grommet Strip – Protects cables entering the enclosure
-
VM01SP Rear Stand-Off Plates – Allow rear cable entry for surface-mounted installations
Ideal Applications
- Large domestic properties
- New-build residential developments
- Property extensions and major refurbishments
- High circuit-count installations
- Homes with smart technology systems
- Renewable energy and battery storage installations
- Electrical installations requiring integrated surge protection
High-Capacity Consumer Unit for Modern Homes
The Hager VME11314SPD Design Evo Consumer Unit combines substantial circuit capacity, integrated surge protection and installer-focused design features in one premium enclosure. Designed to meet the demands of modern residential electrical systems, it delivers reliable protection, flexibility and long-term performance.
Data Sheet:
Download the Hager VME11314SPD Data Sheet
Instruction Manual:
Download the Hager Design Evo Installation Instructions
