Hager VME10910SPD Design Evo 9+10 Way Dual Row 100A Main Switch Consumer Unit with Type 2 SPD

The Hager VME10910SPD Design Evo Consumer Unit is a premium dual-row distribution board designed for modern residential electrical installations. Featuring a 9+10 way configuration, integrated 100A main switch and factory-fitted Type 2 Surge Protection Device (SPD), this consumer unit provides comprehensive circuit protection whilst meeting the requirements of current wiring regulations.

Part of Hager's advanced Design Evo range, the VME10910SPD is specifically engineered for installations located within living areas. The robust metal enclosure, spacious internal layout and installer-friendly features help simplify installation while maintaining a neat and professional finish.

The dual-row design offers excellent flexibility for larger domestic properties, extensions, renovations and homes requiring additional circuit capacity. Factory-fitted surge protection provides valuable protection for sensitive electronic equipment against transient overvoltages caused by lightning strikes and switching events. :contentReference[oaicite:1]{index=1}

Key Features

• 9+10 way dual-row consumer unit with integrated 100A main switch
• Factory-fitted Type 2 Surge Protection Device (SPD)
• Dual-row layout providing 19 usable outgoing ways
• Designed for installations within residential living areas
• Supports compliance with BS 7671:2022 circuit segregation requirements
• Robust metal enclosure designed to meet current fire safety requirements
• Integrated cable clamp secures incoming supply cables and meter tails
• Round cable entry points on the top, bottom and sides
• Rear knockouts supplied for flexible cable entry
• Rigid top wall construction improves enclosure strength
• Full metal DIN rails provide secure mounting of protective devices
• Quick-release RCBO clips allow removal without disturbing the busbar
• Optimised internal wiring space for easier installation
• Top-mounted neutral and earth terminal rails for tidy cable management
• Locate-and-hold cover simplifies installation
• Retained cover screws prevent accidental loss
• Optional locking arrangements available for added security
• Torque settings clearly displayed inside the front cover

Technical Specifications

• Product Code: VME10910SPD
• Range: Hager Design Evo
• Configuration: 9+10 Way Dual Row
• Main Switch Rating: 100A
• Rated Assembly Current (InA): 100A
• Integrated Surge Protection: Type 2 SPD
• Rated Operational Voltage (Un/Ue): 230V AC, 50Hz
• Rated Insulation Voltage (Ui): 320V AC
• Rated Impulse Withstand Voltage (Uimp): 4kV
• Rated Frequency: 50Hz
• Conditional Short Circuit Rating (Icc): 16kA RMS at 250V
• Outgoing Device Ratings: RCBOs 6A–50A
• Ingress Protection: IP2XC
• Impact Resistance: IK05
• Pollution Degree: 2
• Earthing Systems: TN-C-S and TN-S
• Installation Type: Surface Mounted
• Standards: BS EN 61439-3
• EMC Classification: Environment B
• Incoming Line/Neutral Terminal Capacity: 50mm²
• Incoming Earth Terminal Capacity: 16mm²
• Mechanical Impact Protection: IK05
• Warranty: 2 Years

Integrated Type 2 Surge Protection

The factory-fitted Type 2 SPD helps protect connected appliances, consumer electronics, smart home systems and electrical equipment from damaging transient overvoltages. This makes the VME10910SPD particularly suitable for modern homes containing sensitive electronic devices and renewable energy technologies.

Compliance with Modern Wiring Regulations

The Design Evo dual-row range is designed to support compliance with BS 7671:2022 requirements relating to circuit segregation, fault minimisation and concealed cable protection. When installed with RCBO protection on outgoing circuits, the board offers enhanced safety and convenience for domestic electrical installations.

Available Accessories

• VMHBL / JK25A Lock & Padlock Kit – Temporary locking during installation
• VMLOCK Door Locking Kit – Converts the consumer unit into a lockable enclosure
• VM05GS Grommet Strip – Protects cables entering the enclosure
• VM01SP Rear Stand-Off Plates – Allows rear cable entry for surface-mounted installations

Ideal Applications

• Large domestic electrical installations
• New-build housing projects
• Property extensions and renovations
• Homes with smart technology systems
• Renewable energy installations
• High circuit-count residential applications
• Installations requiring integrated surge protection

Professional Residential Distribution Solution

The Hager VME10910SPD Design Evo Dual Row Consumer Unit delivers advanced protection, flexible circuit capacity and installer-friendly features in one premium enclosure. With integrated Type 2 surge protection, modern compliance features and Hager's renowned build quality, it provides a future-ready solution for contemporary domestic electrical installations.

Data Sheet:
Download the Hager VME10910SPD Data Sheet

Instruction Manual:
Download the Hager Design Evo Installation Instructions