Schneider Electric SE24B250 LoadCentre KQ 250A 8 Way Type B TPN Distribution Board

Schneider Electric SE24B250 LoadCentre KQ 250A 8 Way Type B TPN Distribution Board

This Acti9 load centre KQ II B product is a surface mounted distribution board. All incoming connections are the same length ie 4 pole configuration Range of internal incomers for all applications including lugs, switches, RCCBs and MCCBs Outgoing MCBs available up to 63A B, C or D curves 18mm wide RCBO available, minimising use of outgoing ways Plug on outgoers for speeds of installation and guaranteed connection Boards accept DIN control products (timers, contactors) in any unused outgoing way without adaptation Control wiring cable way integrated to moulding The dimensions are (W) 470mm x (H) 484mm x (D) 139mm. According to BS EN 60529 standard, the IP degree of protection is IP2x B internal and IP3x external.

• Range: Acti9
• Product name: Load centre KQ II B
• Product or component type: Distribution board
• device application: Distribution
• Enclosure type: Standard
• door type: Overall
• Provided equipment:
  • Enclosure
  • Door
  • Front cover
  • Pan assembly
  • Earth terminal block 25 mm²
  • Shielded neutral bar 25 mm²
  Complementary:
  
• Enclosure mounting: Surface
• rated operational current: 250 A at 400/415 V AC
• incomer device options:
  • Lugs
  • Switch disconnector - 4P
  • Terminal block - 4P
  • MCCB - 4P
  • RCCB - 30 mA - 4P
  • RCCB - 100 mA - 4P
  • RCCB - 300 mA - 4P
• protection device options:
  • Miniature circuit breaker (MCB) (plug-on type) as outgoer
  • Residual current circuit breaker with overcurrent protection (RCBO) (plug-on type) as outgoer
• Number of ways: 8 ways (3P) outgoer
• Cable entry:
  • Top and bottom: knock-out
  • side: knock-out
• Height: 538 mm
• Width: 470 mm
• Depth: 139 mm
Environment:

• IP degree of protection: IP2x B internal conforming to BS EN 60529
• IP3x external conforming to BS EN 60529

Data Sheet: