Di-LOG DL9130EVPVKIT 18th Edition Advanced EV Multifunction Tester c/w EV DLEV1 Adaptor & SL300 Advanced Solar PV Test Kit Bundle

Di-LOG DL9130EVPVKIT 18th Edition Advanced EV Multifunction Tester c/w EV DLEV1 Adaptor & SL300 Advanced Solar PV Test Kit Bundle

Product Description

18th Edition Complete EV PV Kit bundle
The Di-LOG DL9130EVPVKIT has been explicitly designed for service engineers that offer EV installation as part of their testing portfolio. The DL9130EVPVKIT includes Di-LOG’s latest EV Multifunction Tester, the DL9130EV, along with the DLEV1 EVSE Charge Station Adaptor, if that wasn’t enough, we’ve also got you covered in terms of PV installations too with our state-of-the-arte SL102 Solar Irradiance Meter, and the DL6402 1000Amp AC/DC Clamp Meter.

Brand New Features
A brand-new feature explicitly added to the DL9130EV is Rmax. This brand-new concept will automatically capture the maximum R1+R2/R2 continuity test reading which will register the result on the secondary display for recording once testing is complete. In addition, Di-LOG has added the Zmax feature..

DL9130EVPVKit Key Features

• 6ma RDC-DD Pure DC Test
• Auto EV Test Sequence
• Auto Start Loop & Continuity tests
• Type AC, A, B & Selective (S) RCD Testing
• Rmax & Zmax
• Variable RCD Test
• Colour LCD display with colour change feature
• Proximity Pilot (PP) State 13, 20, 32 & 63A
• Control Pilot (CP) State A, B, C & D
• Error including – PE Pre-Test, CP Error “E” & PE Error
• Type 1 & Type 2 Charge Plugs supplied
• Supplied with a UKAS Calibration Certificate fully traceable to national standards (DL9130EV)
• Electronic overload protection
• Large easy to see backlit displays
• Audible Continuity and Diode test
• DL6402 – 30 mm jaw opening
• 1000 AC/DC Current reading (Dl6402)
• AC/DC voltage up to 600V (Dl6402)
• Temperature thermocouple and K-Type adaptor supplied
• Min/Max recording functions
• SLLSC4 – 4mm MC4 Red/Black lead set for VOC measurement
• All appropriate hard and soft carry cases

Features

• 6mA pure DC test for RDC-DD verification and a full Auto EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection
• Loop Impedance/PSCC – Unique auto start RCD-LOC XLT loop test principle will not trip any RCD or RCBO
• 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection
• RGB colour changing screen visually indicating potential pass/fail conditions
• Phase to Phase Loop with Phase Rotation Test – will indicate the correct phase sequence
• Continuity test – with auto start & null facility to zero out lead resistance
• Auto RCD testing – Trip time, trip current, auto test and ramp current
• Type AC, A, B & Time Delayed RCDs (S)
• Insulation measurement – with 250, 500 & 1000V test voltages
• Phase Rotation Test – will indicate the correct phase sequence
• Integrated socket polarity test
• Fully protected against damage when accidentally connected across phases
• Proximity Pilot (PP) State to simulate the charge lead resistances related to charging lead current limits
• Control Pilot (CP) State to simulate the communication signal emitted from an Electric Vehicle to indicate its readiness to receive charge

The DL9130EVPVKIT MFT Test Kit offers incredible value for a feature-packed MFT meeting all the safety and performance requirements of BS EN 61557.

Data Sheet:

Instruction Manual:

Di-LOG DL9100 Series Brochure: