Skip to content
Wholesale Electrical Supplies Online
Wholesale Electrical Supplies
EXC. VAT
INC. VAT
EnviroVent PIV LoftVent Mk2 Positive Input Ventilation Units

EnviroVent PIV LoftVent Mk2 Positive Input Ventilation Units

The EnviroVent Loft Mounted PIV (Positive Input Ventilation) Unit is a sophisticated whole house ventilation and condensation control unit for homes with a loft space. The PIV unit gently ventilates the home from a central position on the landing in a house or the central hallway in a bungalow to transform a stagnant and stale atmosphere into a fresh, healthy and condensation free environment.

Features & Benefits:

  • Superior long life filters
  • Ultra Low Watt DC motor technology
  • Integral Hours Run Meter (as standard)
  • Integral intelligent comfort heater (LV2-EVL-H only)
  • 3 year warranty
  • Quiet operation
  • Reduces/eliminates surface condensation
  • Eliminates mould
  • Stops streaming windows
  • Removes musty odours
  • Improves air quality
  • Enhances heat distribution
  • Takes advantage of the benefits of solar gain

 

Health Benefits

With improved building features in our homes, such as cavity wall insulation, double glazing and draught proofing, ‘natural ventilation’ is prohibited. Stale air is trapped causing streaming windows, which ultimately leads to musty smells, dampness and mould growth. These mould spores are known allergens and become airborne at the slightest disturbance. 

The microscopic spores are then inhaled and can trigger respiratory problems such as asthma, dust allergies and hayfever. The PIV Loft Mounted Unit draws air into the dwelling from outside and filters it before being delivered into the property. Moisture-laden air is diluted, displaced and replaced with clean, tempered and filtered air. 

This eliminates or reduces surface condensation, which causes mould growth, providing a significant improvement in the health of asthma sufferers and general indoor air quality.

 

Energy Saving Benefits

Minimum Energy Consumption: Powered by an Ultra Low Watt Brushless DC Motor, the EnviroVent PIV Loft Mounted Unit utilises the latest technology to ensure minimum energy consumption and long term trouble free life.

Solar Gain: The unit takes maximum advantage of the benefits of solar gain from within the loft space – the natural accumulation of heat from the sun on bright days. Temperatures in the loft space are on average 3°C higher than outside, using this warmer air results in a relative saving of around 150 Watts per day in an average family home. This equates to approximately 10% of annual heating costs. 

Heat Distribution: Warm air accumulates at ceiling level. This air can be up to 7°C higher than the internal air at ground level. By introducing an almost imperceptible air supply into the dwelling from the loft space, the PIV Loft Mounted Unit helps to redistribute heat around the home and thus reduce space heating costs.

No Need to Open Windows: To reduce humidity and condensation during the heating season, significant energy loss occurs by opening windows. By installing a PIV Loft Mounted Unit and providing fresh filtered air to the home, humid air is displaced without opening windows and thus making significant savings to the occupier.

Low Life-cycle Costs: With 3 year on-going maintenance free warranties and superior long life filters the unit achieves the lowest life-cycle costing. All repairs, maintenance and component replacement is carried out simply and quickly by exchanging the filters. 

*Comfort Heater & Hours Run Meter: The integral comfort heater is designed to temper the incoming air during periods of low external temperatures. A sensor monitors incoming air and slowly pulses the heater to ensure temperatures are held to pre-set minimums. Two independent safety cut-out devices shut down the heater in the event of fan failure. The heater facility is controlled independently from the fan by a conveniently positioned enable/disable switch. For monitoring of operational life and verification of usage, an integral Hours Run Meter is fitted. *heater model only

 

Accreditations
Conforms to the requirements of the UK Building Regulations and the Technical Standards for Ventilation. 

Conforms to requirements of the EC council directives Relating to Electromagnetic Compatibility and Electrical Safety (LDV and EMC). CE Marked.

Previous article Are Broken Plug Sockets Dangerous?
Next article JCC Lighting RadiaLED® Rapid Pro LED Bulkhead: IP65 & IK10 Wattage & CCT Select

Leave a comment

Comments must be approved before appearing

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare